Ink-jet printer maintenance knowledge

First, internal dust removal Information



Open the cover of the ink-jet printer can carry out the work of dust.



Needs to be done are mainly two:



1, with soft, wet cloth to remove dust within the printer, stains, ink stains and broken confetti;



2, if the dust will lead to too many characters lead vehicle axle lubrication is not good, so that the first print campaign in the print process blocked, can be used dry erase sign cotton dust and lead axis of oil pollution, and to add liquidity better lubricants Such as sewing machine oil.



Ink-jet printers for in-house when the dust:



1, not to wipe gear, do not wipe print head and cartridges in the vicinity of the region;



2, generally do not move in the first printing, in particular some of the printers print head in a locked state machinery (such as MJ-1500K, STYLUS COLOR printer, etc.), the print head can not be moved by hand, if the effort to force the first mobile printing, the printer will result in mechanical Some of the damage;



3, no paper products (such as tissues) printers in-house cleaning, the residue inside the machine so as not to litter;



4, can not use volatile liquids (such as thinner, gasoline, spray chemical cleaning agent) clean printers, so as not to damage the surface of the printer.



Second, the cartridges must be replaced



Replacement cartridges when they must operate in accordance with the manual steps. Printer ink on the capacity of the measures is to use the printer's internal electronic counter to the count, in the process of replacement ink cartridges, printer to its in-house electronic counter reset to carry out in order to confirm the installation of a new cartridge.



Replacement cartridges, please note the following:



1, not hand-to-exports of ink cartridges, ink cartridges to prevent the infiltration of impurities;



2, do not fall into the ink cartridges, ink to prevent leakage.



3, with conductive ink, if the leak onto the circuit board should be used alcohol wipe, and then Lianggan electricity, or else they might damage circuit components;



4, ink cartridges should be kept in the dark dust-free, should be preserved at the temperature -10 ℃ - 35 ℃ between.



Third, the print head cleaning Information



Most of the ink-jet printers will start self-cleaning print head, and there are buttons on the print head for cleaning, such as the Canon BJC-610 inkjet printer with the rapid cleaning, washing and thorough cleaning of conventional third gear cleaning function, specific cleansing operation Please refer to the ink-jet printer operations manual steps. If the printer self-cleaning function is invalid, you can print on the first manual cleaning. Hand-washing should be manual steps in the demolition of the first printing.



Hand-washing can be printed in the first set of front-end part of medical syringes thin tube, through strict filtering into the wash water, wash carefully with a magnifying glass to observe nozzle, spray, such as deposition hole next to the remnants of which can be used to remove soft products .



Do not have to be shelved due to the integration of the first printing ink dried up and plug the nozzle can be used to invade the bubble of hot water after washing.



Print head cleaning should note the following:



1, do not use sharp objects to clean nozzle, the nozzle can not hit, do not touch his hand nozzle;



2, can not live in a state of demolition, the installation of sprinkler heads, hands or other objects do not contact print the words electric car contact;



3, the nozzle can not be unloaded from the printer on a separate place, the nozzle can not be placed on dusty places.